NEW SC-8 High Capacity Autosampler

Elemental Scientific introduces the new SC-8 eight-rack autosampler for ICPAES and ICPMS. The SC-8 is available in standard and high speed versions. The SC-8 is fully compatible with the FAST high speed sample introduction system.

The SC-8 is the smallest eight-rack autosampler on the market. It is designed for laboratories that have limited space but could improve efficiency through higher autosampler capacity by increasing the length of unattended runs and reducing the pause associated with reloading sample racks on smaller autosamplers.

The SC-8 is the only eight-rack ICP/ICPMS autosampler with full immediate access to all eight racks. The SC-8 can be configured to hold up to four standard/QC racks with up to 99 standard/QC vial locations.

PC³-LT Low Temperature Peltier Cooled Cyclonic Chamber

The PC³-LT controls the temperature of the sample introduction system resuling in improved precision and reduced oxide interferences.

• +2°C for aqueous / -20°C for organic solvents
• Reduces solvent loading
• Minimizes Polyatomic interferences
• Reduced cost by not having to purchase an external chiller system
• Improved stability
• Reduced sample and skimmer cone cleaning
• Improved rinse out cycle times

SC-E4 High Capacity Autosampler integrated automation for the Thermo ELEMENT 2

• Flexible rack combinations of up to 4 large racks or 6 micro racks or 6 microtiter plates.
• Capacity of up to 576 samples plus 10 standards.
• Dual flowing rinse stations.
• Ideal for high throughput HRICPMS.
• FAST sample injection available.
• ULPA-filtered enclosure available.
• Speciation-ready.

The SC-E4 autosampler cleanly integrates with the Element2 HRICPMS, minimizing the distance between the sample vial and the nebulizer to reduce carry-over.

PC³-FAST Peltier cooled cyclonic spray chamber and FAST switching valve

The PC³-FAST is a space-saving addition to the SC-FAST automated sample introduction system. It combines the advantages of the PC³ inlet system with the speed and cleanliness of the SC-FAST. Ideal for environmental analysis applications.

SC Prime Autosamplers

The SC Prime is a small, economical rotary micro-autosampler designed for laboratories with limited space or that analyze a small number of wide ranging samples.The new SC Prime ELAN integrates into the ELAN ICPMS system by mounting directly to the instrument chassis before the sample introduction area.

• Small size to fit on the sample tray of many ICP instruments.
  7cm x 17cm (2.75” x 6.75”)
• Rigid probe, that can accurately enter small vials without the need for a probe guide
• Short sample capillary—short distance between sample and nebulizer improves uptake and washout. Ideal for self aspirating nebulizers.
• Capacity for simultaneous loading of both small vials and large bottles in a small foot print.
• Flexible configuration for different types of sample container by using wedge racks.
• Programmable probe retraction speed.
• Dual flowing rinse option
• Remote location of electronics/control module to minimize potential contamination.
• Low-cost upgrade pathway to larger SC autosamplers because of common control electronics module.
• Common software with larger SC autosamplers.
• Maximum sample capacity for a given work area, 52 samples with short-arm, 68 samples with long-arm

NEW 12 Position Standards Rack
for SC-Autosamplers